|
 Goodies
Speed Shop’s on-site Dynapack 4000 chassis dyno is great
for testing your base-line performance output or
squeezing that extra horsepower and torque out of your
vehicle by our carburetor and fuel injection tuning
experts.
This dyno is
superior over the typical roller-type dyno. Instead of
parking on a couple of large metal drums that can give
incorrect readings due to loss of traction between the
drum and the surface of the tire and the freewheeling
drums are unable to correctly apply a “load” on your
drivetrain to mimic a true driving environment, the
Dynapack special hub adapters bolt straight to the drive
axles on the vehicle and the power absorbtion boxes are
able to apply a full “load” on the chassis during the
dyno test.
.JPG) It’s not
uncommon to see hot rodders bring in their rides for a
dyno tune and leave with an extra 30 to 50 horsepower.
By reading exhaust gasses during dyno pulls the
technicians are able to adjust the ignition and fuel
delivery system to increase power and efficiency to
eliminate flat spots and increase throttle response.
Dyno Prices
| Basic Dyno
Test including Horsepower and Torque printouts
(up to 3 pulls) |
$130 |
| Dyno
Tuning for Carburetor and Ignition |
$150/hour + $80
Load/Unload fee for over 1 hour of total time |
| Dyno
Tuning/Programming EFI |
$175/hour + $80
Load/Unload fee for over 1 hour of total time |
| |
Add $40 per
session/day for Wide band 02 usage/readings |
| |
Add $45 install fee
weld-in 02 bung for wide band sensor
|
Call (408) 295-0930 or Tool Free (800)
994-0930 to schedule an appointment or to ask questions
|
